Example homepage, built to show what a solar site can do. Built by Olly Hill at Aussie Solar Info. Your branding, photos and numbers go in place of these. olly@aussiesolarinfo.com
Melbourne, Victoria

Solar that is designed for your roof, not sold off a flyer.

We design, install and look after solar, battery storage and heat pump systems for homes and businesses across Melbourne's south east.

CEC accredited installers Rebate paperwork handled Local team, not a call centre
Installers fitting a solar array on a tiled roof
1,200,000
kWh of clean energy generated
14,000
Tonnes of carbon prevented
450
Homes and businesses fitted
VIC
Melbourne and regional Victoria
A day on your roof

Watch where every kilowatt goes.

A real day on a 6.6 kW array behind a 5 kW inverter, with a 13.5 kWh battery. Clouds pass, the kettle and the oven go on, the inverter clips at midday. Drag the slider to any minute, or switch the battery off to see what changes.

Solar 0.0 kW Home 0.0 kW 0% Battery idle Grid 0.0 kW
06:00
Producing
0.0 kW
from the panels
Home using
0.0 kW
lights, fridge, aircon
Battery
0%
holding
Grid
0.0 kW
balanced
Solar production Home demand Imported from the grid Exported to the grid
Before anyone comes out

See what your roof would do.

Most quotes start with a salesperson. This starts with your bill. Move the slider, pick which way your roof faces, and you get a system size, what it generates, and roughly what it saves.

Close detail of solar photovoltaic cells

Size it on your bill

A starting point, not a quote.

$500
System that suits you
5.0kW
Generates a year
6,753 kWh
Off your bill a year
$885
Cost after rebate
$3,350
Pays for itself in
3.8 yrs

A guide only. Based on Melbourne sun hours, a 30c import rate and a 4c feed in tariff. Your assessment confirms the real figures for your roof.

What we do

Solar, batteries, heating and commercial work.

Most homes electrify in stages. We design the whole picture at the start, so the battery you add in three years still fits the system we put on today.

Two installers fitting panels to a tiled roof

Solar systems

Panels sized to how you actually use power and which way your roof faces, rather than to a round number on a flyer.

  • Residential
  • Shading assessment
  • STC paperwork
Solar array across a tiled roof

Battery storage

Storage sized against your evening usage, with backup circuits and monitoring so you can see where the power is going.

  • Load shifting
  • Blackout backup
  • App monitoring
Panels on a house roof at sunset

Heating, cooling and hot water

Heat pumps, split systems and hot water upgrades. These are the loads that decide whether your solar is worth having.

  • Reverse cycle
  • Heat pump hot water
  • Victorian Energy Upgrades
Aerial view of a completed rooftop install

Commercial and industrial

Systems for warehouses, workshops and multi site operators, modelled against your demand profile and your tariff.

  • Interval data review
  • Demand charges
  • Staged rollouts
Products we use

What we put on the wall and on the roof.

We are not tied to one manufacturer. These are the batteries and panels we fit most often, grouped by what they are actually good at. Pick a battery to see it running in the day view above.

Batteries
Panels

Jinko Tiger Neo

Output440 to 460 W
Efficiencyabout 22.5%
Product warranty25 years

The workhorse. Huge production volume, easy to get, and the panel we fit on most standard residential jobs.

Trina Vertex S+

Output440 to 455 W
Efficiencyabout 22.8%
Product warranty25 years

Smaller physical frame for the same output, which matters when the usable part of your roof is cut up by vents, valleys and a hot water service.

REC Alpha Pure

Output450 to 470 W
Efficiencyabout 22.6%
Product warranty25 years

Better performance in heat and in partial shade, and the longest labour cover. Worth it on a roof that bakes in February or catches a neighbour's tree.

Capacities and outputs are the current ranges and move as manufacturers release new models. The exact model, count and layout are confirmed on your quote after the roof assessment.

Victoria

What you can actually claim.

Rebates change often and every retailer quotes them differently. Here is what applies in Victoria at the moment. We apply all of it before you see a price.

$1,400

Solar Homes rebate

For eligible owner occupiers on solar PV, with an interest free loan available for the same amount again. Income and property value tests apply.

About $2,800

Small scale Technology Certificates

Claimed on a typical 6.6 kW system and taken off the quote rather than refunded later. The amount drops every year as the scheme winds down.

3 to 5c

Feed in tariff per kWh

What you get paid for exports is now a fraction of the 30c you pay to import. That is why we size for what you use first and exports second.

How a job runs

Four steps, and we handle three of them.

Installer securing a solar panel to roof rails

Property assessment

Roof, switchboard, shading and twelve months of your usage data, before anyone quotes a number.

Design and paperwork

System design, rebate applications and distributor pre approval, all lodged by us.

Installation

Accredited installers, one crew, usually a single day for a home system.

Connection and support

Meter reconfiguration, monitoring set up on your phone, and a number that still answers in year six.

Get started

Book an energy assessment.

Bring a recent bill. We will tell you what your roof can do, what it costs after rebates, and whether a battery is worth it yet.

Phone(03) 9000 0000 Emailhello@examplecompany.com.au
Office123 Example Street
Melbourne VIC 3000
HoursMonday to Friday, 9am to 5pm